- #Arturia spark stop responding drivers
- #Arturia spark stop responding update
- #Arturia spark stop responding pro
- #Arturia spark stop responding software
Path: /Applications/Digidesign/Pro Tools/Pro Tools.app/Contents/MacOS/Pro Tools Private in is an option even though I have it unchecked. The SPARK shows up as a Controller in the Predefined sub section with an option for Private and Public. That may be normal but since there is no documentation on that part, I can only guess. Note: When I do the MIDI test, it is only the Private In port that indicates that it is active. The right are the Private Ports in and out. The left are the Public In and Public Out. The UPGRADER (Spark 1.1.1 upgrade) is always grayed out but why is it even showing up? Also, I put the Analog Laboratory on MIDI cables and a wall wart since its primary usage is to control the Origin.
#Arturia spark stop responding update
Normally there is nothing attached to the Spark or UpDate controller. I added a blank MIDI instrument in the pictures below just to show what the controller connections are detected as.
#Arturia spark stop responding pro
Pro Tools 9.0.3 plus a few expensive plug-ins. Tascam recorders, Alsis ADAT, JLCooper controllers Thanks for any and all help and or suggestions, we really do want to keep the spark.ġ0.6.7 - 6 gig ram - 4 TB over 5 drive (SATA, USB & FireWire).Īrturia Spark, 49 Laboratory, Origin (all current updates) Of note, after I did the Spark 1.1.1 update both this last time and the very first time, it placed a grayed out update controller at the top of the Audio MIDI Setup. That too strikes me as ODD, it is a MIDI device after all. I have tried using a wall wart for power and midi cables to the MOTU Express 128 and found that NOTHING will see the Spark if the USB cable is not plugged in. Everything else is the same and incredibly stable. The only difference between now and when I could at least launch Spark in PT is that I installed all of the updates for the Arturia Origin (took it from 1.0.7 to 1.3.5). Obviously it didn’t always do this, but even for the few times it did load properly it would eventually crash or not depending on the east wind and time of day. If I create a new instrument track inside a project that works with the Spark and then try and load the Spark into a new instrument track, PT crashes. If I deactivate the Spark in the instrument track, then re-activate it, Pro Tools crashes. If I open an existing project that has the Spark already loaded in an instrument track it will make contact most of the time. The Spark window opens but instead of spinning the connection indicator and making a connection with the Spark, the plug-in does nothing for about 4 seconds then bam! Pro Tools crashes. PT crashed when I launch the Spark plug-in. PT crashed when I tried to bring the Spark in on an instrument track. I have run PT with zero, none, nada other plug-in’s except the Arturia ones.
#Arturia spark stop responding drivers
I have even reinstalled the Spark drivers and done the 1.1.1 update again. I have dumped the Pro Tools prefs several times. I have dumped all the Audio MIDI Setup prefs and even created a new setup in AMS. Sometimes the Spark will kind of do that, but mostly it won’t. I want the Spark to put down MIDI on one track and its audio on another just like I do with the Arturia 49 Laboratory Experience.
#Arturia spark stop responding software
I need to know that, yes, the Spark is currently not so much compatible with Pro Tools 9.0.3 and the expected fix will be out in so may days/weeks/months … OR… Spark is fine, but I need to do X,Y or Z to make it work with Pro Tools …OR… Spark has compatibility issues with X,Y,Z hardware or software …OR… Pro Tools has an issue that Avid is working on and an update will be out in the next so many days/weeks/months …OR… that I am making all of the newbee mistakes in one go and the following clearly written English language documents will set me on the correct path so I can quit mucking around with this expensive studio and actually let the fellow who owns it ply his incredibly talented craft.Ĭurrently the Spark will run fine in the standalone software. I work in all kinds of environments solving all kinds of software, hardware and network problems and I know it just can’t be this ridiculously difficult to get a Spark to work in Pro Tools 9.0.3. I may be new to the recording arts but I have a degree in electronics and I’ve been trained and certified for every Apple System and OS since 1982. Also, this forum won't let me load the pictures so I had to edit the text there.
I'm desperate for a handle on the problem so please excuse any terseness, I'm just frustrated.
0 kommentar(er)
